|
EDGE HOOK:
The Edge Hook is designed to fit on the ceiling frame (closest to the walls)which holds the outside piece of tile of the suspended ceiling. The Edge Hook slides into the groove of the Installation Tool (IT) in the same groove as the Ceiling Hook. Place the "O" Ring on the Edge Hook and then raise the Edge Hook to the ceiling frame height. The "O" Ring should already be holding the visual you want to display. Move it forward towards the wall so it will fit on the ceiling frame. (See picture at left) Simply twist it right or left to remove.
| |
|
|
WALL DISPLAYS:
A 'Vertical Display Strip' can be created by hot gluing our Paper Clips to a strip of ribbon. The ribbon can then be hung from the edge of the ceiling frame by using an Edge Hook thereby eliminating anything being attached to the wall surface. |
|
EDGE HOOKS AND PAPER CLIPS:
The 'SCIENCE LAB' visual at the right is being displayed using HangUmUpEZ. Display all posters, maps, pictures, etc. along the walls quickly and safely. Nothing is actually attached to the wall because you are using the outside ceiling edge frame. Hole punch the display and attach a Paper Clip to it then connect the paper clip to an 'O' ring with fishing line, ribbon, or colorful ribbon, etc. Remember to place the 'O' ring in the Edge Hook before you place it on the outside ceiling support.
| |
|
|
BANNERS AND FLAGS
* Display banners, maps, flags, etc. in hallways and classrooms. Just insert the straight side of the Edge Hook through the grommet and use the Installation Pole to raise the display to the desired location on the ceiling frame.
Click 'SELECT & ORDER' at the top of this page
|
|
| |
